Triag Products – Modular Clamping System
Since founding Triag AG in 1990, we have developed and produced clamping systems for machining. As a pioneer of clever clamping solutions and with our one-of-a-kind interface, which serves as the basis for various clamping types, we have earned an outstanding global reputation. That makes us proud and we work hard on maintaining it.
Our motivation is to give our customers the best support to achieve the highest output of their investments in machine tools. We offer modular vice systems as standard and dedicated solutions for the highest performance. The modular system finds it’s an application from conventional machines to high-end 5-axis automated systems as well as many time on horizontal machines. Naturally, we use for our production our own clamp systems so we have our own practical experience.
powerCLAMP
powerCLAMP is a modular clamping system in which a rail serves as the basis for more than 180 different clamping modules, centric clamps, blanks modules, vacuum modules and magnet modules. It is a mechanical zero-point clamping system as well as a vice.
tripoxyMINERAL
tripoxyMINERAL is light, and therefore machine-preserving, mineral epoxy tombstones that can be used as an alternative to heavy cast iron or steel tombstones. Due to increasingly quick horizontal machining centres, weight reduction of the load is an important factor.
aptoCLAMP
aptoCLAMP is a further development of the powerCLAMP system: it is used to machine workpieces produced by means of heavy roughing, which can be very large and weigh up to several thousand kilograms. It is also based on a base rail.
trivaCLAMP
Vacuum clamping with the trivaCLAMP system is suited for gentle and even clamping of bulky workpieces, plates, U-shaped or angle sections and thin-walled workpieces. Pressure marks and deformations that come with mechanical clamping can also be avoided in this way. When using vacuum clamping, the surrounding atmosphere applies pressure to the workpiece. Workpieces are affixed to the entire surface, which largely prevents vibration. Simple loading and a free working space are additional advantages.
oppSYSTEM
oppSYSTEM is a palletizing system: A pallet carrier mounted on the machine table of the machine tool and at least two pallets or workpiece carriers equipped with centring and clamping bushes. The interface between pallet carrier and pallet makes it possible to quickly (within seconds) exchange the pallets, onto which the workpiece that is to be machined is mounted and positioned outside of the machine tool. This increases the productivity of the machine and thereby the profitability of the entire company.
tricentroClamp
In order to meet various requirements and machining tasks, the self-centring vices can be rotated 90 degrees. Just like all modules of this series, the self-centring vice can easily be positioned along the rail in 2-millimetre increments. The compact and closed construction protects the self-centring vice from contamination.
triGEL
Freeze clamping is a clamping technique that is primarily used for bulky parts made of metal, most mineral materials as well as plastic. Ice offers excellent adhesion. When using the triGEL system, cold gas is run through the work table’s labyrinth of cables and cooled to the working temperature of minus 8 degrees Celsius. The workpieces and the work table are coated with a fine water film, which clamps the parts in place after freezing in approximately 60 seconds. The process is reversed to loosen the workpieces. The device functions as the heating pump. It allows the thawing point to be reached quickly, which releases the workpieces.
Our motivation is to give our customers the best support to achieve the highest output of their investments in machine tools. We offer modular vice systems as standard and dedicated solutions for the highest performance. The modular system finds it’s an application from conventional machines to high-end 5-axis automated systems as well as many time on horizontal machines. Naturally, we use for our production our own clamp systems so we have our own practical experience.
powerCLAMP
powerCLAMP is a modular clamping system in which a rail serves as the basis for more than 180 different clamping modules, centric clamps, blanks modules, vacuum modules and magnet modules. It is a mechanical zero-point clamping system as well as a vice.
tripoxyMINERAL
tripoxyMINERAL is light, and therefore machine-preserving, mineral epoxy tombstones that can be used as an alternative to heavy cast iron or steel tombstones. Due to increasingly quick horizontal machining centres, weight reduction of the load is an important factor.
aptoCLAMP
aptoCLAMP is a further development of the powerCLAMP system: it is used to machine workpieces produced by means of heavy roughing, which can be very large and weigh up to several thousand kilograms. It is also based on a base rail.
trivaCLAMP
Vacuum clamping with the trivaCLAMP system is suited for gentle and even clamping of bulky workpieces, plates, U-shaped or angle sections and thin-walled workpieces. Pressure marks and deformations that come with mechanical clamping can also be avoided in this way. When using vacuum clamping, the surrounding atmosphere applies pressure to the workpiece. Workpieces are affixed to the entire surface, which largely prevents vibration. Simple loading and a free working space are additional advantages.
oppSYSTEM
oppSYSTEM is a palletizing system: A pallet carrier mounted on the machine table of the machine tool and at least two pallets or workpiece carriers equipped with centring and clamping bushes. The interface between pallet carrier and pallet makes it possible to quickly (within seconds) exchange the pallets, onto which the workpiece that is to be machined is mounted and positioned outside of the machine tool. This increases the productivity of the machine and thereby the profitability of the entire company.
tricentroClamp
In order to meet various requirements and machining tasks, the self-centring vices can be rotated 90 degrees. Just like all modules of this series, the self-centring vice can easily be positioned along the rail in 2-millimetre increments. The compact and closed construction protects the self-centring vice from contamination.
triGEL
Freeze clamping is a clamping technique that is primarily used for bulky parts made of metal, most mineral materials as well as plastic. Ice offers excellent adhesion. When using the triGEL system, cold gas is run through the work table’s labyrinth of cables and cooled to the working temperature of minus 8 degrees Celsius. The workpieces and the work table are coated with a fine water film, which clamps the parts in place after freezing in approximately 60 seconds. The process is reversed to loosen the workpieces. The device functions as the heating pump. It allows the thawing point to be reached quickly, which releases the workpieces.
Comments
Post a Comment